N-Series with the most advanced functions and perfect reliability.
The most standard model of "PLACOM" N-Series has made the
excitingly highest attainment in the history of Planimeter ever made.
Measuring capacity is remarkably enlarged.
Measuring by 6-digit pulse count enables to measure 100 times
larger accumulative area than ordinary planimeters.
Easy calculations of Cumulative and Average Value Measurement.
Conversion of Unit and Scale value is made by easy operation.
"WONDER", it is a most worthy word to be given to this "PLACOM" N-Series.
Applications
- Construction and civil engineering
- Forestry area
- Land developing planning
- Ship designing
- Machine designing
- Medical research
- Datalanalysis in statistics
- Agriculture
- Architecture and interior designing
Special features of PLACOM N-Series
Measurement by 6 digit pulse count
This
N-Series can measure the area by pulse count of 6-digits. This method
enables a larger cumulative measurement of area (Up to 1Om2)
Maximum cumulative measurement value of 10m2
With
the measurement by 6-digit pulse count, the N-Series Planimeter can
measure a larger area by 100 times than ordinary Planimeter.
The conventional planimeter has a maximum cumulative area to measure only 0.1m2. If measurement value shows over 0.1m2 when measuring, the display is to be reset to "O".
This requires to register the numbers of how many times these resettings are occurred.
With the New PLACOM N-Series, there is no need of these troublesome procedures.
Easy conversion function of unit and scale
KP-90N
and KP-80N can convert easily the measured area value into a new area
value in a newly desired unit and with a newly desired scale value.
KP-92N and KP-82N can convert the unit between in2 and cm2
Hold memory function
In
cumulative measurement, this Hold Memory function is effectively used.
If an error occurs in measuring, press C/AC key. Then last measured
value is appeared by pulse oount. Since previous measured values before
error are stored, there is no need to another measurements from the
beginning.
Automatic shifting of unit to upper unit
When
the measured area value overtlows the displayed figures of 8 digits,
the measured area value is calculated and displayed by an upper unit.
When the overflows is occurred in the uppermost unit, km2, acre, the measurement can be continued by pulse count display.
Average value measurement
In
order to get better result of measurement, Mean value measurement is
recommended. This measurement can be easily done on this N-Series.
Measurement of an area with different lateral and longitudinal Scale.
Auto-power-off function for energy saving
Specifications :
Type : |
Roller Type With Computing Function |
Display : |
Liquid Crystal, 8-digit Figures 13Symbols |
Symbol : |
Batt-E,SCALE MEMO,HOLD cm2, m2,km2 ,in2, ft2,acre,etc. |
Converting Function : |
Unit and Scale value |
Accumulated Measuring Value : |
Maximum 10m2(Scale 1:1) |
Measuring Range : |
Maximum vertical width: 325mm Horizntal roller rotating length: Unlimited length for any shape |
Accuracy : |
Within +/-0.2%(Within +/-2/1000pluses) |
Power Supply : |
Built-in Ni-MH Battery(rechargeable through AC Adapter) AC Adapter 100-240V (Auto-power-off function is provided.) |
Operating Duration : |
Approx. 30 hours of continuous operation |
Battery Charging Time : |
Approx. 15 hours |
Main Unit Weight : |
750g |
Accessories : |
Supplied AC Adapter and Plastic Case |
Untuk Pemesanan segera hubungi :
Contact :
Aditya KurniawanTelpon :
02199317739 / 085716241676email :
adit.knt@gmail.comYM : cs_knt1
Blog :
karyanusatama.blogspot.comIndonetwork :
indonetwork.co.id/kntonlinestoreWebsite :
www.karyanusatama.com